Detailed Explanation Of The Causes Of Poor Terminal Reinforcement

Detailed explanation of the reasons for the poor reinforcement of Cable Lugs

If the terminal products are poorly reinforced, it will directly affect the reliability of product contact. At this time, it will cause the company to lose power instantly to a great extent, and in serious cases, it will actually mean the disintegration of the company's products. Disintegration also means that the terminal is in the plug-in state. Because of these material design, process and other reasons, it will cause some economic structure information to be unreliable, which will cause abnormal separation between the plug and the socket, and between the pin and the socket. At this time, it will cause the internal control management system to provide power transmission and signal control capabilities interrupted. Serious social consequences.

The poor reinforcement of the terminal may also be due to our unreliable design, followed by errors in material selection, and then, it may be due to improper selection and use of molding technology, or those companies have different heat treatment, molds, and their product assembly and welding processes. The quality is poor, and the assembly is not timely, which will directly cause a poor reinforcement phenomenon.

In addition to this, when it comes to the reinforcement of the bad phenomena of the terminal, that is, due to peeling, corrosion, scratches on the coating or due to the flash of the plastic shell, cracked lines or due to the rough processing and deformation of the contact parts, some bad appearance phenomena will be caused.

In fact, we should also note that the insulator on the terminal not only plays the role of insulation, but also generally in this case, we should also note that it, to a large extent, actually provides a relatively accurate positioning and protection for the extended contact part. At the same time, to a large extent, it actually has the functions of installation and positioning, as well as locking and reinforcement on the equipment.

Finally, the poor reinforcement of the terminal, that is, due to the poor positioning and locking fit size, poor processing quality consistency, and large total separation force, will cause poor exchange, which is precisely a common and frequently-occurring disease. In most cases, these faults will be discovered and eliminated in time during the inspection and use of the terminal.