Introduction To The Production Process Of Anti-corrosion Of Power Fittings

Cutout fuse Introduction to the production process of anti-corrosion

The problem to be solved is that the existing gold has effective resistance to acid and alkali corrosion. The manufacturing process of corrosion-resistant power accessories is as follows:
1. First, remove the dirt on the surface of the power accessories, and then evenly apply a layer of paint to increase the toughness and flexibility on the surface of the power accessories.
2. Apply a layer of epoxy resin on the joint and place a layer of glass cloth before the epoxy resin layer hardens.
3. Cover the surface of the accessories covered with glass cloth with two layers of epoxy resin. After the two layers of epoxy resin are cured, apply three layers of epoxy resin, lay two layers of glass cloth, and then cure the three layers of epoxy resin. Next, apply four layers of epoxy resin on the two layers of glass cloth.
Continue to apply four layers of epoxy resin with one or more layers of epoxy resin. Continue to apply the second layer of epoxy resin with one or more layers of epoxy resin. Corrosion-resistant hardware consists of two layers: a flexible layer applied on the top of the hardware, a layer of epoxy resin, a layer of glass cloth, and a layer of epoxy resin. Apply three layers of epoxy resin on every two layers of epoxy resin, place two layers of glass cloth, and apply four layers of epoxy resin. The corrosion-resistant power accessories are manufactured in a new way, with the advantages of corrosion resistance, good insulation performance, good mechanical bearing capacity, good flexibility, etc.