Regulations For The Use Of Portable Grounding Wires For Line Fittings

Regulations for the use of Suspension Clamp portable grounding wire:

1. Use multiple strands of soft bare copper wire with transparent plastic hose. The cross-section should meet the requirements of short-circuit current, but should not be less than 25mm².

2. A special wire clamp must be used to fix the grounding wire on the power-off equipment. It is strictly forbidden to ground or short-circuit the power-off equipment by winding. The grounding wire should be checked in detail before each use. It is forbidden to use unqualified line hardware grounding wires.

3. Each set of line hardware grounding wires should be numbered and placed in a fixed position. The storage position should be numbered, and the grounding wire number and storage position must be consistent.