APDM Pole Mounted Cutout fuse

APDM Pole Mounted Cutout fuse

SMICO APDM basic function of 160A Pole Mounted Fuse Switch Disconnecter for NH fuse link is to protect and disconnect a network during faults and is specially designed for on-load switching. The switch offers a reliable medium for disconnection and protection of fully insulated open wire network. The fuse switch is versatile and ideally suited for mounting directly to poles, transformers and cross arms.

Features:

* Designed fo full load switching with Fuse links or disconnecting blades upto a rated current.

* Integral mounting facility and unique modular design allowing one, two, three or more switches to be installed together to meet SP, TP or TPN system requirements.

* Fully insulated made from corrosion proof, impact resistant, weather and UV resilient glass fibre reinforced polyamide compound with high glass content suitable for consistent performance under adverse climatic conditions.

* The upper housing of the switch is hinged to the lower body and can be withdrawn by the insulated operating rod thereby enables, changing of fuses from ground level.

* Flexibility of linking a series of flaps for simultaneous operation.

* The contacts, made up of ETP grade copper – duly plated are rigidly mounted in the housing independent of the terminal bolts. Single incoming and Double outgoing termination is provided in standard version.

* Electrical & Mechanical fuse indicators are provided to show status of blown fuse.

* Mounting clamp & Coach screw provided along with for easy mounting.

Miniature version

A miniature version is also available with all listed features and neon indicator to indicate status of blown fuse.

The design is relatively smaller, light weight but robust to meet adverse climatic conditions as per pollution level 3 & technical characteristics of IEC-60947 – 1 & 3.

A choice of termination is available to meet any requirement.

The basic function of 160A Pole Mounted Fuse Switch

Terminations Available

Based on the requirement of the customer, we can supply Fuse switch disconnector with either Bolted, Pillar or V Groove Termination.

Type Testing:

The fuse switch has been extensively type tested repute as per IEC 60947 part 1,& 3

Technical Characteristics:

APDM 160 - Seccionador unipolar NH hasta 160 ADescripción generalTensiónNivel de aislaciónFrecuenciaCategoría de utilizaciónCorriente de breve duración (1s)Corriente dinámica (cresta) Capacidad de interrupciónPesoGrado de protecciónCorriente operacional con fusibles                             con cuchillas500 V1000 V50/60 Hz160 A250 AAC22B3,2 KA25 KA100 KA 600 gIP 24APR160(con soporte HAPRS160)APR3160(tripolar aperturamonofásica)Esquemasde montajeCaracterísticas técnicasDetalle de conexión IP24CONEXION POR TERMINALCONEXION POR CONECTOREl seccionador APR 160 es un equipo de protección y maniobra en líneas de baja tensión diseñado para el uso con fusibles NH 00 brindando protecciones a líneas de hasta 160 amperes. Fabricado en poliamida reforzado con fibra de vidrio, cumple con todos los requerimientos necesarios para su instalación y operación en intemperie; además de ser robusto y capaz de operar hasta 250 amperes con cuchillas.El seccionador modelo APDM 160 se suministra para ser conexionado con terminales en forma interna y segura, sin embargo puede solicitarse para conexion con conectores . (De acuerdo a los requerimientos de la IEC 60947)El seccionador fusible APDM160 posee los siguientes caracteristicas incluidas:conexión internaindicador luminoso de operacion del fusibleindicador de fusible instaladojunta de estanqueidad de conexiónposibilidad de precintado de seguridadencastres para hermanado de seccionadores en forma bipolar, tripolar, tetrapolar etc.ojales adecuados para correcta y segura operacion de apertura y cierre, montaje y desmontaje de la tapa portafusible